Calculator

Runtime calculator

Usable watt-hours = capacity × efficiency. Hours = usable watt-hours ÷ (watts × duty cycle). The default efficiency is 0.85, the same assumption the pairing pages use. The math runs in your browser.

Start from a published page
Use the watt-hour figure on the station, not the amp-hour figure, unless you have already converted it.
0.85 means you plan on keeping 85% of the battery after inverter loss. Change it only if the maker published a figure you want to try.
If you have one number, type it in both boxes.
100% means the load stays on. Use a lower number only for compressor-on watts. A yearly energy-label average already includes off time, so leave this at 100 for those.
If you fill this in, a load above it is flagged. The hours still display so you can see the arithmetic.

Result

Type a capacity and a load, or start from a published example.

What this box will not do

It does not know your appliance. A preset only fills in numbers already published on this site. Startup watts, if the maker never printed them, are still unknown after you press a preset.

A fuel generator is not a watt-hour battery. Do not type a generator's running watts into the capacity box. Those pages, when they are written, will use the tank size from the manual.

Keep a fuel generator outside, away from doors and windows. Carbon monoxide from an exhaust does not care how careful the runtime math was.