Motor · Appliances

Window air conditioner

Two Frigidaire 8,000 BTU window units list 690 W and 720 W while cooling. Neither spec sheet publishes a separate startup wattage.

· About 2 min read

Load
Motor
Figures this site will use when it pairs this appliance with a station.
FigureValueHow it was reached
Running watts 690–720 W The low and high figures in the sources. Not averaged into a single "typical" watt.
Nameplate 8.8 A at 115 V 115 × 8.8 = 1,012 volt-amps. The maker did not publish watts or power factor, so runtime math treats those volt-amps as watts. That can overstate the watts and understate the hours.
Starting watts Not published The sources checked for this page do not print locked-rotor or startup watts. Pairings stay at maybe unless the running load already cannot fit.

An 8,000 BTU window unit is the size people ask about for a bedroom. These two Frigidaire sheets are the sources. A larger BTU rating is not a small stretch of the same number. Get that model’s watts.

Cooling watts, from the spec sheets

GHWW085TE1 is the inverter, Wi-Fi, Energy Star version in the February 2025 sheet. Cooling is 690 W, 8.8 A, 115 V, 8,000 BTU. The sheet also says low-voltage start-up: yes.

FHWW084TE1 is the January 2024 sheet for a non-Energy-Star 8,000 BTU unit. Cooling is 720 W, 8.4 A, 115 V. Low-voltage start-up is also yes. Combined energy efficiency on that sheet is 10.9. The inverter sheet’s combined figure is 15.

The running range used for pairings is 690 W to 720 W. The amp figure used for the current check is 8.8 A, the higher of the two, at 115 V. Eight point eight amps times 115 volts is about 1,012 volt-amps, in the same neighborhood as the watt ratings. The runtime still uses the watt figures Frigidaire printed, not that volt-amp product.

Startup and duty cycle

Neither sheet prints locked-rotor watts. A compressor start can exceed the cooling watts for a moment. Because that moment is unpublished, a pairing with a motor-driven station limit stays at maybe when the cooling watts fit, and becomes a no only when the cooling watts themselves do not fit.

The inverter model can throttle. Frigidaire does not print the watts at the low fan speed. A continuous estimate at 690 W is the high cooling figure, held for the whole hour. If the unit cycles or throttles, the battery lasts longer than that estimate. This page does not invent the shorter duty cycle. Hot weather that keeps the compressor on is the case the 690 W and 720 W rows already describe.

BLUETTI’s AC180 marketing mentions an 8,100 BTU air conditioner as an example load and does not give its watts. That example is not used here. Power Lifting Mode on that station is also the wrong tool: BLUETTI says not to use it for an air conditioner.

Pairings that use this appliance

Questions people ask

How many watts does an 8,000 BTU window unit use?

Frigidaire's GHWW085TE sheet lists 690 watts and 8.8 amps at 115 V while cooling. The FHWW084TE sheet lists 720 watts and 8.4 amps at 115 V. Both are 8,000 BTU. A 5,000 BTU or 12,000 BTU unit is a different appliance and is not these two numbers.

Does the inverter model start more easily?

The GHWW085TE sheet says low-voltage start-up is yes, and it is the inverter model. The FHWW084TE sheet also says low-voltage start-up is yes, and it is not the inverter model. Neither sheet prints a starting-watt number. Low-voltage start is not a wattage.

Sources

  1. Frigidaire GHWW085TE specification sheet, 690 W, 8.8 A, 8,000 BTU — Frigidaire
  2. Frigidaire FHWW084TE specification sheet, 720 W, 8.4 A, 8,000 BTU — Frigidaire